Floating Frame (larger than 30 x 45)

Floating Frame (larger than 30 x 45)

This is the hanging option you will get if you order a Floating frame in a format bigger than 30 x 45.

Available for: Floating frame

Professional Screw Suspension


  • Not visible from the front
  • Indoor use only
  • Accessories included
  • Floating frame features: 3.7 cm frame height (side view), 1 cm frame thickness (front view), 8 mm gap between picture and frame
  • Depth of the frame of the back: 2.5 cm

Available to order separately: Yes, you can order individual mountings in the Accessories section of our webshop.

Assembly instructions

Materials Required:

  • Your Wall Art with a Floating frame
  • Professional Screw Suspension set (contains 10 screws and 4 felt pads)
  • A pencil
  • A level (optional, but useful)
  • A tape measure
  • Two nails or screws for wall installation (consider the weight of the frame and the wall material when choosing)
  • A screwdriver
  • A hammer or additional screwdriver, according to your chosen wall fasteners
  1. Before hanging up the Wall Art on the wall, you will need to prepare the frame. Turn your Wall Art face down on a clean, soft surface to protect the art during installation. Glue the four felt pads to the corners of the floating frame. This will protect your wall from scratches.
  2. Using the enclosed screws, attach the mounts to your Wall Art. Ensure that the mounts are placed equidistant from the top of your Wall Art to maintain balance when hanging.
  3. Measure the distance between the two mounts, as well as the distance from the top of the Wall Art to the mounts. Decide where you want your Wall Art to hang and mark the spot lightly with a pencil where you want the art to be.
  4. Using the centre point you’ve marked, and the distances you’ve measured between the mounts and from the top of the art to the mounts, mark the two spots where the screws or nails will go into the wall. If you have a level, you can use it here to ensure the marks are level.
  5. Using a hammer or screwdriver, carefully install the nails or screws at the spots you marked. Leave a small portion protruding from the wall for the mounts to hang on.
  6. Align the mounts on the back of the Wall Art with the screws or nails on the wall, and gently hang your Wall Art. Step back and look at it from a few different angles. If needed, adjust the nails or screws.

Congratulations your Wall Art is now hanging on the wall.

Professional Screw Suspension Assembly


Your language setting does not match the language of this website. Please choose:

Your language setting does not match the language of this website. Please choose: