Aluminium Subframe

Aluminium Subframe

The aluminium subframe comes pre-fixed on the back of your Wall Art if you choose this option. With about 1 cm between the picture and the wall, it gives the appearance of floating in the air. Please, keep in mind that the aluminium subframe cannot be removed subsequently without damaging the product.

Available for: Metal print, Brushed Metal Print, Acrylic, GalleryPrint, PVC Foam Board, Multipart Wall Art

Aluminium Subframe

Features

  • Not visible from the front
  • Available for all formats
  • Suitable for outdoor use
  • Pre-mounted on wall art
  • Distance to edge varies depending on format size
  • Nails or screws for hanging are not included
  • Can be hung directly on the wall on nails without any additional accessories
  • Weight of the Aluminium subframe: approximately 190.5 g/m

Available to order separately: No, since the mounting comes attached to your Wall Art, using a special adhesive process that guarantees the stability.

Assembly instructions

Materials required:

  • Your Wall Art with the subframe installed
  • A pencil
  • A level (optional, but useful)
  • A tape measure
  • Two nails or screws (consider the weight of the wall art)
  • A hammer or screwdriver, according to your chosen fastener

With the aluminium subframe you can quickly and easily attach your Wall Art to the wall. Depending on the type of wall, you only need two nails or screws to hang the rail. Eyelets or similar fastening aids are unnecessary.

  1. First, decide on placement and measure the distance between the two points on the aluminium subframe where your screws or nails will go. Also measure the distance from the top of the art to these points.
  2. Using the centre point you’ve decided on, measure and mark the two spots where the screws or nails will go into the wall. Check with a level to see if the marks are even.
  3. Then, carefully hammer the nails or screw in the screws at the spots you marked. Leave a small portion protruding from the wall to hang the subframe on. Do not yet make them tight against the wall as you may need to adjust the protruding length to accommodate the depth of your subframe.
  4. Carefully position the Wall Art so the nails or screws align with the holes on the aluminium subframe. Lower it slowly onto the nails or screws.

Aluminium Subframe Assembly

Congratulations! Your Wall Art is now hanging on the wall.

For galleries, we recommend the Gallery Aluminium Subframe, which is specifically made to use with gallery rope suspension systems.

Aluminium Subframe Assembly

 

Your language setting does not match the language of this website. Please choose:

Your language setting does not match the language of this website. Please choose: